REM Framework
  • Home
    • Contact
    • Download
    • Featured
    • Development
      • Origin of the REM Framework
      • Roadmap
      • Changelog
  • Fundamental Principles
    • Introduction
    • Definitions
    • Axioms
    • Mathematical Structure
  • Fundamental Mechanics
    • Fundamental Node Equation
    • Recursive Node Dynamics
    • Wave Propagation
    • Identity
    • Occupancy
    • Pressure
    • Transport
    • Imbalance
    • Diamond Lattice
      • REM Framework — Publishing Workflow Test
  • Emergent Physics
    • Emergence
    • Gravity
    • Mass
    • Electricity
    • Magnetism
    • Electromagnetic Field
    • Entropy
  • Emergent Organization
    • Stable Configurations
    • Compound Identities
    • Atom-like Structures
  • Validation
    • Double-Slit Experiment
    • Stability Analysis
    • Simulation Results
    • Diamond Lattice Simulation Results: Arrival Timing and Directional Spread
Fundamental Mechanics 14 November 2026

Publishing workflow verification

This second revision tests the review interface. Choose Current version or an earlier approved revision from the Compare against dropdown, then preview the proposed article before deciding whether to approve it. Review marker REMREVIEW20261114C.

For four neighbours, the restoring acceleration is \(\mathbf{a}=\frac{k^2}{4}\sum_{j=1}^{4}(\mathbf{n}_j-\mathbf{p})\).

This proposed revision tests selecting a menu destination during review. Save menu placement to stage a destination, then preview and approve when ready. Review marker REMMENUREVIEW20261114.

Private deployment check for REM Publisher 2.2.0. Marker REMDEPLOY220PRIVATE20261114. Awaiting human review.

Fundamental Mechanics 14 November 2026

Overview

If one node moves, which nodes feel the disturbance on the next update? In the original cubic lattice of the Recursive Emergent Mechanics (REM) Framework, an interior node has six neighbours, one on either side of each coordinate axis. In the experimental diamond lattice it has four. Changing those connections while keeping the Fundamental Node Equation gives REM a way to study how the geometry of a neighbourhood shapes a travelling wave.

The name comes from the arrangement of atoms in a diamond crystal. REM borrows that geometry. A node represents a site in a mechanical model, and a bond identifies a pair of sites that can influence one another directly.

Diamond Lattice Geometry

Imagine a cube with a node at its centre. Pick four alternating corners so that no two share an edge. The directions from the centre to those corners are the four bond directions. The corners form a regular tetrahedron, so all four bonds have the same equilibrium length and every pair makes the same angle, $\arccos(-1/3) \approx 109.47^\circ$. Diamond crystals have this four-neighbour coordination. Crystallographic reference.

The diamond lattice has two interleaved sets of sites, called sublattices. Each bond connects one set to the other. If the four outward unit vectors at a site in the first set are $\mathbf e_1,\ldots,\mathbf e_4$, the four directions at a site in the second set are their negatives. At either site the four vectors add to zero. This is how a node can have a balanced neighbourhood even though none of its four bonds has an opposite partner at that node.

Fundamental Node Equation

Let $\mathbf p$ be the current position of an interior node and $\mathbf n_j$ the current position of its $j$th neighbour. With coupling parameter $k$ and no external drive, the Fundamental Node Equation gives the following restoring acceleration.

$$ \mathbf a = \frac{k^2}{4}\sum_{j=1}^{4}(\mathbf n_j-\mathbf p) = k^2(\bar{\mathbf n}-\mathbf p). $$

Here $\bar{\mathbf n}$ is the mean of the four neighbour positions. At equilibrium that mean coincides with the node, so its acceleration is zero. As a thought experiment, hold the neighbours still and move the centre a distance $d$ upward. At the next update its acceleration points downward with magnitude $k^2d$. Moving the whole neighbourhood upward together leaves every relative position, and hence the acceleration, unchanged.

Wave Propagation

Now let the neighbours move. The displaced node appears in each neighbour’s own position sum. Those neighbours acquire acceleration, their velocities change, and their new positions affect the next layer of nodes. Repeating this update carries a pulse across the lattice. A disturbance can therefore travel many bond lengths while individual nodes oscillate near their equilibrium sites.

The direction in which a node oscillates is its polarization. A source can move up and down along $z$ while receivers to its side detect a pulse travelling across the $xy$ plane. This distinction matters when placing receivers. To compare travel in different directions, place them at the same straight-line distance from the source and identify the same feature of the pulse at each receiver.

Directional Isotropy

Directional isotropy means that a measured property is independent of direction under otherwise equivalent conditions. The tetrahedron gives four equivalent bonds at each interior node. A wave travelling across many nodes samples many bonds, and its arrival time, amplitude and speed can each have a different directional dependence.

The REM v0.5.0 transverse survey (run transverse-1794261672465) used a $240^3$ diamond lattice with absorption off. For each of 26 source orientations, it sampled 16 rays perpendicular to the oscillation axis. That gave 416 complete pulse records at each of 16 radii from 40 to 85 equilibrium bond lengths. Recording finished at update 272, before the run’s conservative boundary limit of 319 updates.

Arrival was the first time the signal magnitude reached half of that receiver’s own peak, interpolated between updates. At each radius the survey calculated the directional spread as the range of arrival times divided by their mean. The spread was 1.060% at 40 bond lengths and 0.260% at 85. All 15 sampled radii from 43 through 85 were below 1%.

A weak pulse and a strong pulse can reach half of their respective peaks at nearly the same time. In this run, peak-amplitude spread ranged from 8.98% to 18.40% across the shells. Speed estimated by matching waveforms between adjacent shells had a spread of 1.25% to 2.20%. The sub-1% result therefore applies specifically to half-peak arrival timing at the stated radii, for this excitation and these sampled directions.

Mechanical Imbalance

Node acceleration answers “How will this node move on the next update?” Its input is the instantaneous vector imbalance $\bar{\mathbf n}-\mathbf p$. Locating a wave source asks a different question. A node oscillating along $z$ reverses its acceleration during a cycle even if the source stays in exactly the same place.

For the source-direction investigation, each of the four neighbouring sites can supply a three-dimensional geometric measurement. At each site the diamond diagnostic measures how much each of its own bonds has stretched or shortened from equilibrium, multiplies that signed change by the bond’s current unit direction, and sums the contributions. This gives a vector $\mathbf w_j=(w_{jx},w_{jy},w_{jz})$ for neighbour $j$. Comparing these four responses across space gives a candidate imbalance gradient. The comparison reads the motion generated by the node equation and leaves the acceleration calculation intact.

Cycle-Based Measurement

One snapshot can catch an oscillation as it passes through zero. The proposed measurement follows all three components at all four neighbours through the same complete oscillation cycle $C$, bounded by successive occurrences of the same phase at a reference receiver. One candidate statistic is the peak-to-peak range for each component $\alpha$.

$$ W_{j\alpha}=\max_{n\in C} w_{j\alpha}(n)-\min_{n\in C} w_{j\alpha}(n), \qquad \alpha\in\{x,y,z\}. $$

For a $z$-oscillating source, compare the four $z$ ranges at their known positions around the receiver. Weight each equilibrium bond direction by its neighbour’s $z$ range and project onto the $xy$ plane.

$$ \mathbf G_{xy}=\sum_{j=1}^{4} W_{jz}(e_{jx},e_{jy}). $$

Four equal ranges cancel. A larger range on one side tips the estimate towards that side. Where oscillation strength increases towards a single source, this gives a candidate bearing in the plane. Peak-to-peak reconstruction still needs validation. A direct test would place the source at a known bearing, measure angular error over successive complete cycles on both sublattices, and compare it with the error obtained using root-mean-square amplitudes. A zero vector supplies no bearing.

Pressure and Transport

In REM, an Identity is a persistent oscillator. Its Occupancy identifies the lattice node it currently occupies. Pressure is the directional imbalance accumulated by that Occupancy over time. Transport is a discrete event in which the Identity transfers its Occupancy to a connected neighbour. A pulse can pass through the lattice while an Identity stays at the same site.

A future test could hold the Occupancy at one site while a source runs on one side, then repeat with the source on the other side. Does accumulated Pressure reverse with the measured bearing? A source-off control would reveal any drift caused by the geometry or the measurement itself. A subsequent test could enable transfers and record which of the four neighbours receives the Identity when the transfer condition is met. This would test the proposed link between a cycle measurement and a transport decision.

Conclusion

Four tetrahedral connections suffice for the Fundamental Node Equation to transmit a disturbance through the experimental diamond lattice. The transverse survey gives a concrete benchmark for how closely pulse arrival times agree across directions. Can one receiver recover a known source bearing from just four neighbours over a cycle? Answering it would give the Pressure and Transport investigations a directional measurement they can test independently.

Testing first change article via ChatGPT

Featured
Fundamental Mechanics 26 July 2026

 

Introduction

The previous chapters introduced the concepts of Pressure and Transport, explaining how an Identity moves through the lattice. However, one fundamental question remains:

Why does transport begin at all?

Before an Identity can respond to its surroundings, it must first detect that one direction differs from another. Without such a difference, every neighbouring direction is mechanically equivalent, no pressure accumulates, and no transport occurs.

The REM Framework calls this local difference an imbalance.

This chapter introduces the concept of imbalance and the Local Imbalance Principle, which proposes that an Identity responds only to locally measured differences in the state of its neighbouring lattice nodes. This principle provides the mechanical foundation for investigating how physical phenomena may emerge from recursive local interactions.

 

Perfect Equilibrium

Consider an Identity surrounded by neighbouring lattice nodes that are all in exactly the same mechanical state. Every neighbouring direction contains identical information. No direction is preferred over another.

Under these conditions the lattice is in local equilibrium. Since no measurable difference exists between neighbouring nodes, no imbalance is detected, no pressure accumulates, and the Identity remains stationary.

A perfectly balanced environment therefore produces no physical response.

 

Breaking the Equilibrium

An oscillating Identity continuously generates a recursive source wave that propagates through the surrounding lattice.

As the source wave travels outward, its amplitude gradually decreases with distance from the source. When this wave reaches another Identity, the neighbouring lattice nodes no longer experience identical amplitudes.

The local equilibrium has now been broken.

This difference between neighbouring measurements is called an imbalance.

 

The Local Imbalance Principle

The REM Framework proposes the following principle:

An Identity never responds directly to distant objects. It responds only to locally measured differences in the state of its neighbouring lattice nodes.

This principle is entirely local. An Identity does not observe where another Identity is located, nor does it require information about distant parts of the lattice. Every decision is based solely on measurements performed within its immediate neighbourhood.

Complex behaviour may therefore emerge from repeated local interactions without requiring any non-local communication.

 

Measuring an Imbalance

Suppose a recursive source wave approaches an Identity from the left.

Because the wave amplitude decreases with distance from its source, the neighbouring node on the left measures a slightly larger amplitude than the neighbouring node on the right.

In other words,

$A_{left} > A_{right}$

The Identity compares the amplitudes measured by its neighbouring nodes and calculates their difference,

$\Delta A = A_{left} - A_{right}$

This local comparison immediately provides two pieces of information:

  • the magnitude of the imbalance, and
  • the direction from which the source wave arrived.

The Identity therefore never measures the distant source directly. It measures only the local state of the lattice surrounding it.

 

REM Imbalance

 

Why This Principle Matters

The Local Imbalance Principle introduces a general mechanical mechanism for responding to the surrounding lattice.

In this chapter the imbalance is determined by comparing recursive source-wave amplitudes measured across neighbouring lattice nodes. However, the REM Framework is not restricted to amplitude alone.

Future investigations may reveal other locally measurable quantities capable of defining an imbalance, including:

  • source-wave amplitude,
  • node position,
  • node velocity,
  • node acceleration,
  • rotational properties of the lattice,
  • or other locally measurable quantities that emerge as the framework develops.

Although the measured quantity may differ, the underlying principle remains unchanged: an Identity responds only to locally measured imbalances.

 

Conclusion

The concept of imbalance provides the missing link between the fundamental mechanics of the REM Framework and the emergence of physical phenomena.

Rather than introducing separate mechanisms for every interaction, the REM Framework investigates whether different physical phenomena originate from different kinds of locally measured imbalances while following the same underlying Local Imbalance Principle.

If this principle proves applicable across multiple phenomena, it may provide a unified mechanical foundation for understanding how complex behaviour emerges from recursive local interactions.

The next chapter investigates the first application of this principle: Gravity.

Featured
Fundamental Mechanics 22 July 2026

The REM Framework can be understood as a sequence of simple local processes:

Identity
    ↓
Oscillation
    ↓
Source Wave
    ↓
Recursive Wave Propagation
    ↓
Mechanical Asymmetry
    ↓
Directional Imbalance
    ↓
Pressure
    ↓
Transport
    ↓
Emergent Behaviour

Each step follows directly from the previous one. Together they describe how localized oscillations can produce complex behaviour without requiring non-local interactions or movement of the lattice itself.

 

Mechanical Asymmetry

An oscillating Identity produces a mechanical wave whose amplitude decreases with distance as it propagates through the recursive lattice. As a result, neighbouring lattice nodes generally do not experience identical mechanical states.

This local asymmetry allows an Occupancy to compare opposite neighbouring directions. By measuring these differences, it can determine the direction of the originating disturbance without directly interacting with the Identity itself.

Mechanical asymmetry is therefore one of the fundamental ideas of the REM Framework. It provides the information from which Pressure, Transport, and later mass-like and gravity-like behaviour emerge.

 

Emergent Behaviour

The purpose of the Core Mechanism extends beyond Identity transport. The same local processes that govern wave propagation and Occupancy movement also give rise to increasingly complex behaviour as larger collections of interacting Identities evolve.

Within the REM Framework, mass-like and gravity-like behaviour are not introduced as fundamental assumptions. Instead, they are investigated as emergent consequences of the recursive mechanical interactions described by the Core Mechanism.

Subsequent chapters explore each stage of this mechanism in detail and examine how increasingly complex physical behaviour emerges from these simple local principles.

 

Looking Ahead

The Core Mechanism provides a high-level view of how the REM Framework operates. Each chapter that follows examines one stage of this mechanism in greater detail, beginning with the fundamental role of the Identity.

Featured
Fundamental Mechanics 22 July 2026

The previous chapter introduced Pressure as the accumulated local imbalance experienced by an Occupancy. Pressure explains why movement becomes favourable, but it does not explain how movement actually occurs.

This leads to the final question of this sequence. How can continuous motion emerge if the lattice itself remains stationary and an Identity occupies only one node at a time?

The REM Framework answers this question through Transport. Transport is the process by which an Identity changes its Occupancy from one lattice node to another. Rather than moving continuously through space, motion emerges from a sequence of local Occupancy transfers.


Why is Transport Necessary?

Without Transport, Pressure could accumulate indefinitely without ever producing movement. The framework would describe the tendency to move, but no actual motion would occur.

Transport therefore converts accumulated Pressure into physical movement. It provides the final step connecting local mechanical interactions with the observable motion of persistent structures.

Together, Identity, Occupancy, Pressure and Transport form a complete mechanism for emergent movement.


What is Transport?

Transport is the process by which an Identity transfers its Occupancy from its current lattice node to one of its neighbouring nodes. Only neighbouring nodes participate in each transfer. No long-distance movement or global knowledge is required.

When a transfer occurs, the Identity itself remains unchanged. Only the Occupancy changes. The previous node becomes unoccupied while the neighbouring node becomes occupied by the same persistent Identity.

The lattice itself remains stationary throughout the entire process.


When Does Transport Occur?

Transport does not occur continuously. Instead, accumulated Pressure is compared against the transport conditions established by the framework.

Once sufficient Pressure has accumulated along one direction, the Occupancy transfers to the neighbouring node corresponding to that direction.

Following the transfer, the Pressure associated with the previous Occupancy is reset or updated according to the transport rules, allowing the process to begin again at the new location.


Locality

Every Transport event is completely local. An Identity never skips nodes and never requires information beyond its immediate neighbourhood.

This locality is one of the central principles of the REM Framework. Complex motion emerges entirely from repeated local interactions without requiring global forces or non-local communication.

The path followed by an Identity therefore emerges naturally from many individual local decisions rather than from a predetermined trajectory.


Emergent Motion

Although each individual Transport event moves an Identity by only one lattice node, repeated Occupancy transfers produce smooth macroscopic motion.

From the perspective of an external observer, an Identity appears to move continuously through space. Internally, however, every movement consists only of discrete transitions between neighbouring nodes.

Continuous motion therefore emerges from discrete recursive dynamics.


Emergent Velocity and Momentum

Velocity is not assigned directly to an Identity. Instead, it emerges from the frequency and direction of successive Transport events. An Identity that transports more frequently appears to move faster than one whose Pressure accumulates more slowly.

Likewise, momentum is expected to emerge from the continued accumulation and redistribution of Pressure during repeated Occupancy transfers rather than existing as an independent fundamental property.

These quantities therefore arise naturally from the recursive dynamics instead of being introduced as separate assumptions.


The Complete Mechanism

The four concepts introduced throughout these chapters form a single recursive process.

An Identity continuously excites the surrounding lattice. Its Occupancy determines where this excitation occurs. Local mechanical imbalances accumulate as Pressure. Once sufficient Pressure has developed, Transport transfers the Occupancy to a neighbouring node. The process then repeats recursively.

No global controller directs movement. Every observable trajectory emerges entirely from local recursive interactions.


Current Status

The Transport mechanism provides the final component required for describing motion within the REM Framework. Movement is not fundamental but emerges from the interaction between Identity, Occupancy, Pressure and recursive lattice dynamics.


Conclusion

Pressure explains how an Identity is transported through the lattice, but it does not explain why transport begins. Before pressure can accumulate, an Identity must first detect a difference in its local surroundings. Without such a difference, every neighbouring direction remains mechanically equivalent, no pressure is accumulated, and no transport occurs.

The REM Framework proposes that every physical response begins with the Local Imbalance Principle: an Identity responds only to locally measured differences in the state of its neighbouring lattice nodes. The Identity does not detect distant objects directly. Instead, it compares the measurable properties of its immediate neighbours and responds only to the resulting imbalance.

This principle provides a purely local mechanical foundation for transport and introduces a unified way of investigating emergent behaviour. Rather than requiring separate mechanisms for different physical phenomena, the REM Framework explores whether gravity, electricity, magnetism and other interactions may originate from different kinds of locally measured imbalances.

The next chapter introduces the concept of Imbalance and explains how local measurements may determine both the magnitude and the direction of an emerging physical response.

Future research will investigate how increasingly complex phenomena—including gravitational attraction, magnetism, electric charge, atomic structure and other physical behaviour—can emerge from this same recursive mechanism.


Looking Forward

The REM Framework has now introduced the fundamental concepts required to describe persistent structures and their motion within a stationary recursive lattice.

The next stage is no longer to define new building blocks, but to investigate the physical phenomena that emerge from their interaction. How can waves produce attraction? How can rotating oscillations produce magnetism? How can local transport generate electric current? And how can increasingly complex structures eventually give rise to the universe we observe?

The remainder of the REM Framework explores these questions by allowing complex behaviour to emerge from the simple recursive principles established in the preceding chapters.

  1. Pressure
  2. Occupancy
  3. Identity
  4. Wave Propagation

Page 1 of 2

  • 1
  • 2
© 2026 REM Framework
  • Home
    • Contact
    • Download
    • Featured
    • Development
      • Origin of the REM Framework
      • Roadmap
      • Changelog
  • Fundamental Principles
    • Introduction
    • Definitions
    • Axioms
    • Mathematical Structure
  • Fundamental Mechanics
    • Fundamental Node Equation
    • Recursive Node Dynamics
    • Wave Propagation
    • Identity
    • Occupancy
    • Pressure
    • Transport
    • Imbalance
    • Diamond Lattice
      • REM Framework — Publishing Workflow Test
  • Emergent Physics
    • Emergence
    • Gravity
    • Mass
    • Electricity
    • Magnetism
    • Electromagnetic Field
    • Entropy
  • Emergent Organization
    • Stable Configurations
    • Compound Identities
    • Atom-like Structures
  • Validation
    • Double-Slit Experiment
    • Stability Analysis
    • Simulation Results
    • Diamond Lattice Simulation Results: Arrival Timing and Directional Spread